Unit 4
12 London Road
FIT VENETIAN BLINDS
25MM VENETIAN BLINDS
-
Brackets should be positioned approximately 3 inches from each end of headrail taking care to aviod the tilt and lift mechanisms. Space any additional brackets supplied evenly across the window being careful to avoid cord positions.
-
Position brackets at window or surrounds. When fitting inside a recess the blind should to be positioned far enough away from the window to be clear of the window handles when lowered.
-
Push the front lip of the headrail against the front of the bracket against the spring pressure and rotate the rear of the headrail upwards to locate in the fixing lugs.
-
Lowering: To unlock the cords, pull to left and release gently through the hand until the required drop is reached. Lock the cords by returning to the right.
-
Raising: With the slats fully open, pull cords downwards until the desired height is reached. Lock by taking them to the right.
N.B . Never raise the blind when slats are in a closed position.
Tilting:
25 mm : Rotate the acrylic wand clockwise or anticlockwise to tilt the slats to the position of your choice.
Maintenance:
The slatting may be kept free of dust etc. with an occasional wipe with a cloth.